46 CHAPTER 3: SYSTEM MANAGEMENT
Figure 24 Path Name dialog box
Select the check boxes Read, Write and Delete in FILES and click OK to return.
Figure 25 Edit Users/Group check box
4 The cards can be upgraded on-line after the on-line upgrading files are copied to
the path of the serv-u FTP.
Perform the following configuration in the system view.
Table 20 Configure on-line upgrading of the card
5 The system will display the following information according to different situations:
If the on-line upgrading succeeds, the Console displays the following prompt
information:
End of programming successful! Total 131072 bytes written.
If the on-line upgrading fails, the Console periodically displays the following
prompt information:
Please enter the update request command for slot number
Operation Command
Configure on-line
upgrading of the card
software
update slot slot-number ftpserver { host-name |
ip-address } filename file-name [ port
port-number | user user-name | password
password ]
