356 CHAPTER 10: TROUBLESHOOTING
Table 77 LUI Menu Items — Business and Basic Telephones
Option Name Description
1 View Settings Press 1 on the number pad to access a menu in which
you use the scroll buttons to view these options:
■ MAC Address – MAC address of this telephone.
■ NCP MAC Address – MAC address of call processor
All Fs indicates that the telephone responds to any
Control Processor. This is the default setting.
■ SW Build Ident. – Revision of software running on
this telephone.
■ Serial # Rev – Serial number and hardware
revision of this telephone.
■ My IP Address – IP address of this telephone.
■ Subnet Mask – The IP mask applicable to this
subnetwork.
■ Gatwy IP Address – IP address of the default
gateway for this subnetwork.
■ NCP IP Address – IP address of the call processor with
which this telephone communicates.
To return to the main menu:
■ On the NBX Business Telephone, press Program.
■ On the NBX Basic Telephone, press MSG.
2 Set my IP Lets you specify the IP address of this telephone.
When entering an IP address:
■ Use the key pad to enter digits 0–9.
■ Use the left and right soft keys to move the cursor left
or right.
■ If any of the fields within the IP address contain only
one or two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
■ Press the # key to commit your address change.
■ To exit without saving any changes:
On the NBX Business Telephone, press Program.
On the NBX Basic Telephone, press MSG.
To change a telephone back to its default setting, enter
all Fs for the NCP IP address.
3 Set SubNMsk Lets you specify the mask that is appropriate for this
subnetwork.
