Source Is
The Source is: setting specifies the source tray to use for printing a document. The list of source
trays depends on the printer accessories. Any optional source trays that are installed through the
Configure tab also appear here.
The Source is: drop-down menu can contain the following options:
● Automatically select
● Manual Feed in Tray 1
● Tray 1 (100-sheet multipurpose tray)
● Tray 2 (500-sheet tray)
● Tray 3 (500-sheet tray)
● Tray 4 (500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the printer uses
the source tray that supports the media size that you have selected. If you select a source
tray other than Automatically select, make sure that the correct media size is loaded in the
source tray. For more information about media sources, see the
Media attributes section of
this guide.
Type is
The Type is: drop-down menu shows all the media types that the HP Color LaserJet 4650
printer supports. When you use the default setting, Unspecified, the product uses the default
media type, which is usually Plain.
The following standard types appear in the lists:
● Unspecified
● Plain
● Preprinted
● Letterhead
● Transparency
● Prepunched
● Labels
● Bond
● Recycled
● Color
●
Cardstock (164 to 200 g/m
2
or 43 to 53 lb.)
●
Heavy (105 to 119 g/m
2
or 28 to 31 lb.)
● Envelope
●
Light (60 to 75 g/m
2
or 16 to 20 lb.)
●
Intermediate (90 to 104 g/m
2
or 24 to 27 lb.)
●
Ex Heavy (120 to 163 g/m
2
or 31 to 43 lb.)
●
Glossy (75 to 105 g/m
2
or 20 to 28 lb.)
●
Heavy Glossy (106 to 120 g/m
2
or 28 to 31 lb.)
EN Chapter 3 HP traditional print drivers for Windows 97
