To receive uncollated multiple copies of a print job with the mopier enabled, you must clear
the Ignore Application Collation check box and make sure that the software program
collation feature is not selected.
The following table shows the relation between Mopier Enabled settings and collation settings
in the software program and the driver. The first three columns show the settings; the last
column, "Expected result", shows how a 3-page print job would appear.
Table 3-6. Driver Mopier mode and collation settings
Mopier Enabled
Application collation Ignore Application
Collation
Expected result
Not selected Not selected Not available 3 copies uncollated
Not selected Selected Not available 3 copies collated
Selected Not selected Not selected 3 copies uncollated
Selected Not selected Selected 3 copies uncollated
Selected Selected Not selected 3 copies collated by
printer
Selected Selected Selected 3 copies collated by
printer
Optional Paper Sources
The Optional Paper Sources drop-down menu lists optional media source trays for the
HP Color LaserJet 4650 printer. The list of available source trays varies depending on your
product , its input accessories, and the product configuration settings on the Configure tab.
For the HP Color LaserJet 4650 printer, the following settings are available in the Optional
Paper Sources drop-down menu:
● (None). This is the default setting for the HP Color LaserJet 4650 printer.
● 2x HP 500-Sheet Input tray.
● HP 500-Sheet Input tray.
Other Options
The Other Options group box contains a single More... command button. Clicking the More...
button opens the More Configuration Options dialog box.
124 Properties tabs EN
