Print Task Quick Sets
Use the Print Task Quick Sets control to store the current combination of driver settings that
are found on all other Printing Preferences driver tabs. Print task quick sets are either preset or
user-defined printing specifications, such as media size and pages per sheet. For more
information, see the
Paper/Quality tab features section of this guide.
Status group box
The unlabeled group box on the Job Storage tab contains a status message about the
destination of a print job. The status information changes depending on the selections that
are made on the Job Storage tab.
Job Storage Mode
Use the Job Storage Mode options on the HP Color LaserJet 4650 printer to store
documents at the product and then control their printing at the product control panel. This
feature is intended to provide greater flexibility, convenience, security, and cost savings.
The HP Color LaserJet 4650 printer offers the following Job Storage Mode options:
● Off
● Proof and Hold
● Private Job
● Quick Copy
● Stored Job
● Require PIN to Print (available when Stored Job is selected)
These options and the settings that control them are described below.
Off
When selected, this option turns the Job Storage feature off (it is disabled), which means
that the print job will not be stored in the product.
Proof and Hold
To use the Proof and Hold option, Job Storage must be enabled, and the product must
have a minimum total memory of 288 MB.
When selected, this option stores the print job in memory and prints only the first copy of the
job, allowing you to check the first copy. If the document prints correctly, you can print the
remaining copies of the print job at the control panel. You can set the number of proof-and-
hold print jobs that can be stored in the product at the control panel.
After it is released for printing, the proof-and-hold job is immediately deleted from the
product. If more copies are needed, you must reprint the job from the software program. If
you send a second proof-and-hold job to the product with the same user name and job name
as an existing proof-and-hold job (and you have not released the original job for printing), the
job will overwrite the existing job. Proof-and-hold jobs are deleted if you turn off the product.
EN Chapter 4 HP PCL 6, HP PCL 5c, and HP PS 3 emulation unidrivers for Windows 185
