Filter
Top Products
Finish working with the given device.
ReadRegister
API Code
C++ unsigned int ceDevice::ReadRegister(unsiged int uiRegister)
C CE_RESULT ReadRegister(CE_DEVICE_HANDLE Handle, unsigned int uiRegister,
unsigned int *puiValue)
.NET uint ceDevice.ReadRegister(uint uiRegister)
Read 32 bit value from FPGA design address space (internally just calling ReadBlock()
with size = 4).
WriteRegister
API Code
C++ void ceDevice::WriteRegister(unsiged int uiRegister, unsigned int uiValue)
C CE_RESULT WriteRegister(CE_DEVICE_HANDLE Handle, unsigned int uiRegister,
unsigned int uiValue)
.NET void ceDevice.WriteRegister(uint uiRegister, uint uiValue)
Write 32 bit value to FPGA design address space (internally just calling WriteBlock() with
size = 4).
ReadBlock
API Code
C++ void ceDevice::ReadBlock(unsiged int uiAddress, unsigned char *pucData, unsigned int
uiSize, bool bIncAddress)
C CE_RESULT ReadBlock(CE_DEVICE_HANDLE Handle, unsigned int uiAddress,
unsigned char *pucData, unsigned int uiSize, unsigned int uiIncAddress)
.NET void ceDevice.ReadBlock(uint uiAddess, byte[] Data, uint uiLen, bool bIncAddress)
Read a block of data to the host buffer which must be large enough to hold it. The size
should never exceed the value retrieved by GetMaxTransferSize() for the specific device.
bIncAddress is at the moment available for USB devices only. It flags to read all data from
the same address instead of starting at it.
WriteBlock
API Code
C++ void ceDevice::WriteBlock(unsiged int uiAddress, unsigned char *pucData, unsigned int
uiSize, bool bIncAddress)
C CE_RESULT WriteBlock(CE_DEVICE_HANDLE Handle, unsigned int uiAddress,
USBS6 / C1030-5510 http://www.cesys.com/
User Doc V0.3 -46- preliminary