92
Advanced Operations
Restore backup data:
Note: All current data will be overwritten when restoring the Backup file!
1. Press Instrument Backup in the "System Check" menu.
2. Insert the USB stick with the backup (refer to section 3.5,
page 16).
3. Press Restore to pass back the data.
4. The report "Restore instrument backup from S/N XXXXXXX.
"Restore?" displays the serial number of the instrument
relating to the backup. Press OK to confirm.
5. Restart the instrument after the backup is complete.
6.1.6 Service menu
Use of the service menu requires a service code. This menu is
reserved exclusively for the service staff of the manufacturer for
service work.
6.1.7 Service time
In order to make sure a regular inspection is performed, an
automatic memory reference for the service times can be
entered. After switching the instrument on, this memory reference
will be activated and indicated at the appropriate time.
1. Press Service Time in the "System Check" menu.
2. Activate the On checkbox.
3. Press Last service.
4. Enter the date of the last service.
5. Press OK to confirm the selection.