Filter
Top Products
93
Advanced Operations
6. Activate the options field under Next service.
7. Select a time interval for the next service.
8. Press OK to confirm the selection.
When the next service is due the report "Next service due!!" is
displayed when the instrument is switched on.
9. Press OK to return to the Main Menu.
Contact the manufacturer to schedule the next service date.
6.1.8 Lamps operating time
The "Lamps operating time" provides information on the
switch-on cycles of the lamps.
After a lamp is replaced, the display of the switch-on cycles is
reset to 0.
1. Press Lamp History in the "System Check" menu.
2. Press Reset and the lamp data are reset.
3. Press OK to return to the "System Check" menu.
6.2 Toolbar
There is a toolbar with various programs on the right-hand side of
the screen. Many of these programs can also be called up via a
menu but the operation is the same.
6.2.1 Log on
Use this function to enter up to 30 different operator initials (up to
10 characters each) into the instrument. This feature helps record
which operator measured each sample. For a detailed
description, refer to section 5.2, page 23.