Filter
Top Products
94
Advanced Operations
6.2.2 Sample ID
Use this function to enter up to 100 different sample designations
(each with max. 20 characters) into the instrument. Sample IDs
can be used to specify the sample location or other sample
specific information, for example. For a detailed description, refer
to section 5.2.2, page 24.
6.2.3 Timer
Use this function to activate a timer at any time.
1. In the toolbar, press Timer.
2. Enter the required time and confirm with OK.
The count-down starts automatically.
3. Press Close to let the timer run in the background.
Press Cancel to stop the timer.
4. When the timer has finished a sound is emitted.
6.2.4 AQA
Analyzing an AQA standard solution enables you to check your
working procedure, photometer and accessories. Press AQA in
the toolbar on the right-hand side of the screen to open a list of
standard solutions. For a detailed description, refer to
section 6.1.4, page 89.