Filter
Top Products
19
Switching Between A Bus and B Bus
Changing the operation mode is accomplished using the menus. For more information about how to do this, refer to
“Changing Settings Using the Menus” (p. 36).
*The on-screen menu will only appear on a monitor connected to the A/B MIX PVW jack.
1. From the menu, select “Panel Mode Setup.”
Press the [MENU] button to display the menu screen. From the list that appears, choose “Panel Mode Setup,” then press
the [ENTER] button.
2. Choose “PGM-PST Mode” or “LVS Mode.”
•PGM-PST mode This lets you use the [AUTO] button for A/B MIX to execute a transition after checking the preview video.
•LVS mode This lets you perform a transition directly using the input selector buttons.
3. End the menu display.
Press the [MENU] button several times to make the menu display disappear.
The Names of the Buses in the PGM-PST Mode
When the operation mode is changed to the PGM-PST mode, the names of the buses also change. “A” becomes “PGM,”
and “B” becomes “PST.”
Use in Other Operation Modes Besides the A/B Mode
Changing the Operation Mode