Filter
Top Products
31
Saving Settings to PANEL PRESET Buttons
You can save the state of various controls to [PANEL PRESET] buttons. Saving lets you call up a variety of settings at the
press of a button. The [PANEL PRESET] buttons are numbered from 1 to 12, and let you save up to 12 sets of settings.
You can save the state of the controls described below.
fig.preset-parameter.eps
*The internal position between A and B of the video fader is indicated by the lighted location of the TRANSITION indicator next to the video fader.
This may not necessarily match the position of the video fader. To make these match up, move the video fader forward and backward all the way.
Follow the steps described below to save the current state.
1. Put the unit in the state you want to save.
Make the settings for the bus input channels, Picture-in-Picture, and other values.
2. Save the settings.
To save the settings to one of the [PANEL PRESET] buttons from 1 through 6, press and hold the button for three seconds
or longer.
To save the settings to a button from 7 through 12, press the [SHIFT] button to make it light up, then press and hold the
desired button for three seconds or longer.
When all [PANEL PRESET] buttons flash, the saving operation has finished.
fig.save-7to12.eps
To recall values that have been saved, press the button corresponding to the number you want to call up. The pressed
button lights up and the saved values are recalled. Recalling settings in this way puts the various controls in the same
state they were in when the settings were saved. The pressed button lights up while the recalled state remains in effect. If
the called-up state is changed, the button goes dark.
*To call up values saved at a button from 7 through 12, press the [SHIFT] button, then press the numbered button.
Saving the Current Settings
Calling Up Saved Settings
Items Parameters to save
Bus A Input Selector Selected input channel
Bus B Input Selector Selected input channel
Video Fader Position between A and B *
TRANSITION Button Selected transition effect type
PinP Button Selected PinP position (1-4)
AUTO Button Output or non-output of foreground
TRANSITION Button Appearance and disappearance of foreground
BACKGROUND Button Background channel
A/B MIX
Section
DSK
Section
FOREGROUND Button Foreground channel
KEY LEVEL Dial Level of keyer
TIME Dial Time of transition and PGM output fade
PGM OUTPUT FADE Output or non-output of program picture
Others
DSK Key Mode Color of keyer
DSK PinP On/Off of DSK PinP and the position (1-4)
1-6 7-12