Filter
Top Products
30
Applying Fade to the Final Output
You can apply fade-in or fade-out to the output from the PGM OUT connectors (the program output).
Pressing the [AUTO] button for PGM OUTPUT FADE makes the button’s LED flash and starts a fade-out. When the fade-
out has been completed, the button stops flashing and stays lit. Press the PGM OUTPUT FADE button again to start a
fade-in. When the fade-in ends, the LED goes dark.
fig.out-fade-button.eps
If you want to change the fade-in or fade-out time (to any value from 0 to 4 seconds), adjust it using the TIME dial.
fig.time-dial.eps
By default, black is the color used for fades. You can also use the menus to select white. Refer to “Changing Settings Using the Menus”
(p. 36) and “Menu List” (p. 38).