Filter
Top Products
34
Returning to Factory-default State (Factory Reset)
This returns various settings to their factory defaults.
Executing a factory reset causes all settings and saved values except the following settings to be lost.
(Please be aware that settings saved to PANEL PRESET buttons are also lost.)
•NTSC/PAL setting (p. 35)
•Calibration of the video fader (Video Fader Calibrate A/B)
*To view the on-screen menu, you need to have a monitor connected to the A/B MIX PVW jack.
1. At the menu, choose “Factory Reset.”
Press the [MENU] button to display the menu. From the list, choose “Factory Reset,” then press the [ENTER] button.
fig.screen1.eps
2. Choose “Yes [ENTER] SW.”
Use the arrow buttons to choose “Yes [ENTER] SW.”
fig.screen2.eps
3. Execute FACTORY RESET.
Pressing the [ENTER] button returns the unit to its factory-default state.
*Pressing the [MENU] button at this stage returns you to the previous screen without returning the unit to its factory-default state.
4. Quit the menu screen.
Press the [MENU] button several times to make the menu display disappear.