Filter
Top Products
23
Switching Between A Bus and B Bus
4. Move the video fader to the A Bus (inset screen) side.
Move the video fader to the A Bus side. The inset screen appears.
*The way the inset screen comes into view differs according to the transition-effect setting. When [CUT] has been selected, it remains hidden until the
middle position is reached, and is displayed thereafter.
fig.move-Tbar-A.eps
5. Move the video fader to the B Bus (background) side.
Move the video fader to the B Bus side. The inset screen disappears.
*The way the inset screen disappears from view differs according to the transition-effect setting.
fig.move-Tbar-B.eps
You can apply Picture-in-Picture by using the [AUTO] button for A/B MIX, without operating the video fader.
You can also change where the inset screen is displayed while Picture-in-Picture is being applied. Pressing a different [P in P] button
from the one you chose in step 3 changes the display location.
In the LVS mode, using a B Bus input selector to change the background picture during display of an inset screen makes the displayed
inset screen disappear. If this happens, move the video fader to the B Bus side, then move it back to the A Bus side. Returning it to the
A Bus side makes the inset screen reappear.
In the A/B mode, changing the background does not make the displayed inset screen disappear.
The only transition effects available for selection during Picture-in-Picture composition are [MIX] and [CUT]. Selecting [WIPE1] or
[WIPE2] is not possible.