Filter
Top Products
35
Switching Between NTSC and PAL
The LVS-800 can switch to NTSC or PAL at startup.
Switching to NTSC at Startup
At the DSK section, under [BACKGROUND], hold down the [A/B MIX] and [7/PC1] buttons and turn on the power.
Once set to NTSC, the setting persists in memory even after power off.
fig.change-NTSC.eps
Switching to PAL at Startup
At the DSK section, under [FOREGROUND], hold down the [A/B MIX] and [8/PC2] buttons and turn on the power.
Once set to PAL, the setting persists in memory even after power off.
fig.change-PAL.eps
You can also use the menus to switch between NTSC and PAL. At the “Utility” menu, choose “NTSC/PAL,” then select “NTSC” or
“PAL.” After this operation, the setting requires some time to take effect.