Filter
Top Products
25
Switching Between A Bus and B Bus
4. Press a [P in P] button.
Press any of the four [PinP] buttons. The location where the inset screen is displayed varies depending on the button you
press. The [A] in the square on the panel indicates the location of the inset screen.
fig.PinP-button.eps
5. Display the inset screen.
Press the [AUTO] button for A/B MIX to composite the inset-screen picture on the background. The results of
composition are output to a recording unit or projector connected to a A/B MIX OUT connector.
*The way the inset screen comes into view differs according to the transition-effect setting. When [CUT] has been selected, it appears instantly when
the [AUTO] button for A/B MIX is pressed.
fig.auto-transition.eps
6. Make the inset screen disappear.
Press the [AUTO] button for A/B MIX to make the inset-screen picture disappear.
*The way the inset screen disappears from view differs according to the transition-effect setting. When [CUT] has been selected, it disappears instantly
when the [AUTO] button for A/B MIX is pressed.
You can also change where the inset screen is displayed while Picture-in-Picture is being applied. Pressing a different [PinP] button from
the one you chose in step 3 changes the display location.