Filter
Top Products
37
Changing Settings Using the Menus
Use the procedure described below to change various settings.
1. Display the menu.
Go to SETUP and press the [MENU] button. The menu screen appears on the preview monitor.
fig.press-MENU.eps
2. Choose the item whose setting you want to change.
Use the up and down arrow buttons to choose the item whose setting you want to change.
fig.cursor-button.eps
3. Decide on the setting-change item.
Press the [ENTER] button to move down one level.
fig.ENTER-button.eps
*If the menu item is located at a deeper level, repeat steps 2 and 3.
*To go back to the original level, press the [MENU] button.
4. Change the setting value.
Use the up and down arrow buttons to change the setting value.
fig.cursor-button.eps
5. End the menu display.
Press the [MENU] button several times to make the menu display disappear.
The values of menu settings are saved in internal memory when you exit the menu. To save the values of settings, exit the menu screen
before you turn off the power.
Menu Operations