Filter
Top Products
43
Menu List
MIDI Setup Menu
These settings are required when operating the unit by remote control.
fig.MIDI-menu.eps
Utility Menu
fig.Utility-menu.eps
*1 When Memory Protect is on, PANEL PRESET settings can be called up, but setting values cannot be changed or saved. It also becomes impossible
to change the setting values for any menu items.
*2 The settings for other items persist in memory after the power is switched off, but the on/off setting for color-bar output is not saved.
MENU
MIDI Setup
MIDI Channel This sets the MIDI send and receive channel.
MIDI Out/Thru Switch This determines whether output is passed through unchanged.
Device ID This sets the MIDI device ID.
Input A-BUS Assign This sets the input selection message for Bus A.
Input B-BUS Assign This sets the input selection message for Bus B.
Video Fader Assign This sets the message for video fader operation.
A/B Transition Assign This sets the message for A/B transition effect selection.
DSK Background Assign This sets the message for DSK background channel selection.
DSK Foreground Assign This sets the message for DSK foreground channel selection.
DSK Fader Assign This sets the message for DSK fader operation.
DSK Transition Assign This sets the message for DSK transition effect selection.
DSK Key Level Assign This sets the message for DSK key-level adjustment.
PGM Output Fade Assign This sets the message for OUTPUT FADE operation.
Transition Time Assign This sets the message for adjusting the transition time.
Panel Preset Assign This sets the message for PANEL PRESET operation.
MIDI Reset This returns the MIDI settings to factory-default state.
PinP Assign This sets the message for PinP selection.
MENU
Utility
Memory Protect This turns Memory Protect on or off. *1
Video Sync Threshold This raises or lowers sensitivity for video-input synchronization signals.
Video Fader Calibrate A This performs calibration of video fader on Bus A side.
Video Fader Calibrate B This performs calibration of video fader on Bus B side.
Input Select Delay Time This sets the transition time when performing a transition through button operation.
No Signal Blueback This turns blueback output on or off when a channel having no input is selected.
Color Bar Out This turns color-bar output on or off. *2
Utility Reset This returns the Utility-menu settings to factory-default state.
NTSC/PAL This switches between NTSC and PAL.