Filter
Top Products
54
Other Parameters
Parameter Range Explanation Panel operation
RECORDER SYNC
OUTPUT
OFF, ON
If this is on, MIDI clock messages (F8) will be
transmitted to an external MIDI device.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [PLAY/STOP] button and press the EFFECTS
[TEMPO SYNC] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
RECORDER
METRONOME MODE
Species how the metronome will sound.
OFF: Metronome will not sound.
REC-ONLY: Metronome will sound only during recording.
REC&PLAY: Metronome will sound during recording and playback.
ALWAYS: Metronome will sound constantly.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [REC] button and press one of the following
eect buttons.
[DIST] button: OFF
[FLANGER] button: REC-ONLY
[DELAY] button: REC&PLAY
[REVERB] button: ALWAYS
3. Press the [CANCEL/SHIFT] button.
RECORDER
METRONOME LEVEL
0–7 Species the volume of the metronome.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [REC] button and press one of the NUMBER
[1]–[8] buttons.
1–8: 0 (minimum) – 7 (maximum)
3. Press the [CANCEL/SHIFT] button.
Time setting for
POWER SAVE MODE
OFF,
1 min,
3 min,
5 min, 10 min,
20 min, 30 min,
60 min
If no operation is performed during the duration
of time you specify here, the SH-01 will enter
power-conservation mode.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the EXT IN [MUTE] button and press one of the
NUMBER [1]–[8] buttons.
1: OFF
2: 1 min
3: 3 min
4: 5 min
5: 10 min
6: 20 min
7: 30 min
8: 60 min
3. Press the [CANCEL/SHIFT] button.
MANUAL (p. 30)
Hold down the [PRESET PATCH] button and press the [USER PATCH] button.
TONE COPY (p. 30)
1. Press the [TONE COPY] button.
2. Press the [SELECT] button of the copy-source tone.
3. Press the [SELECT] button of the copy-destination tone.
How to Initialize a Patch
Hold down the [CANCEL/SHIFT] button and press the [WRITE] button.