Filter
Top Products
22
Listening to the Demo Song
The internal demo song features the TD-20’s expressive
capabilities and top quality sounds. The drums on this song
were recorded from the TD-20 system to a sequencer in real
time.
1.
Press [CHAIN] and [TOOLS] simultaneously.
The “DEMONSTRATION” screen appears.
fig.Demo_70
2.
Press [F5 (PLAY)].
The demo song is played.
* Press [F4 (STOP)] to stop the demo song.
You can use [+/-] or [VALUE] to switch the kit being
used in the song, an easy way to check the sounds.
* Preset drum kits are always selected to play the demo song.
Function Buttons
[F1 (DRUMS)]
You can MUTE the enntire drum track.
[F2 (BACKING)]
You can MUTE all the backing instruments.
• You can change the volume balance with [GROUP
FADERS] (p. 24).
• Hold down [SHIFT] and press [TEMPO] to turn the
metronome click (p. 59) on/off.
The click sounds with the settings which you set before
you enter the “DEMONSTRATION” screen.
3.
Press [EXIT] or [KIT] to return to the “DRUM
KIT” screen.
Demo Song
Cluster Hang Copyright (C) 2004, Roland US
981a
* All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a violation
of applicable laws.
982
* No data for the music that is played will be output from MIDI
OUT.
Caution Concerning Volume
When playing back the demo song, turn [MASTER] and
[PHONES] to the left (counterclockwise) to bring the
volume level down. The sound levels (volume) of the
instruments may be louder when the demo song is
played back.
TD-20_Ref_e.book 22 ページ ２００５年５月２５日 水曜日 午前９時４９分