Filter
Top Products
83
Chapter 11. Drum Kit Chain [CHAIN]
Chapter 11
[CHAIN]
Each chain’s name can use up to 12 characters.
fig.11-ChainName_70
1.
Select the drum kit chain you want to name in
the “DRUM KIT CHAIN” screen.
2.
Press [F1 (C EDIT)] - [F5 (NAME)].
The “CHAIN NAME” screen appears.
3.
Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
4.
Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position, and
characters after this point are moved to the right one
space.
[F2 (DELETE)]
Character at the cursor position is deleted, and characters
after this point are moved to the left one space.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
[F4 (CHAR)]
Type of character at the cursor position changes between
upper case/lowercase alphabet, or numbers and
symbols.
5.
When you’re finished, press [EXIT] twice to
return to the “DRUM KIT CHAIN” screen.
1.
Press [CHAIN] to switch Drum Kit Chain on.
[CHAIN] lights.
fig.11-ChainPlay_70
2.
Press [CURSOR (up/down)] to select the chain
number to be used.
3.
Use [+/-] or [VALUE] to call up the kits to be
used in each selected step in the chain.
4.
When the performance is finished, press
[CHAIN] or [EXIT] to switch Drum Kit Chain off.
[CHAIN] goes off.
With the Foot Switch and Pad Switch functions, you can
use the foot switches and pads to call up drum kit chains.
For more details, refer to
Using Foot Switches [F1
(FOOT SW)]
(p. 79) and
Using Pads as Switches [F2
(PAD SW)]
(p. 80).
If differences in volume levels between kits is a problem,
press [MIXER] - [F4 (KIT VOL)] and adjust “Kit Volume”
(the overall kit volume).
Naming a Drum Kit Chain
[F5 (NAME)]
Playing with a Drum Kit
Chain
TD-20_Ref_e.book 83 ページ ２００５年５月２５日 水曜日 午前９時４９分