Filter
Top Products
29
Chapter 1. Drum Kit Settings [KIT]
Chapter 1
[KIT]
1.
Press [KIT] - [F2 (FUNC)].
2.
Press [F1]–[F3] and [CURSOR (up/down)] to
select the parameter.
3.
Use [+/-] or [VALUE] to make settings.
fig.01-003_70
Each kit can have an individual tempo setting.
When you select a kit of which Kit Tempo is set to “ON,” the
tempo you define here will be set automatically.
fig.01-004_70
When you select a kit of which Kit Tempo is set to “ON,”
the defined tempo appears in the upper right of the
display.
fig.01-004a_70
In each kit, you can choose whether sticks or brushes will be
used.
fig.01-005_70
When Brush Switch is set to “ON,” the brush icon
appears in the “DRUM KIT” screen.
fig.01-005_70
You can check the output level from the selected jacks.
Use [+/-] or [VALUE] to choose the jacks.
Choose from: Master, Phones, and separate stereo outs.
fig.01-005a_70
Kit Parameters [F2 (FUNC)]
Adjusting the Volume [F1 (VOLUME)]
Parameter Value Description
Kit Volume 0–127 Volume of the entire drum
kit
Pedal HH Volume 0–127 Volume of the hi-hat’s foot
closed sound
XStick Volume 0–127 Volume of cross stick sound
Assigning a Tempo for Each Kit
[F2 (TEMPO)]
Parameter Value Description
Kit Tempo OFF, ON
OFF:
tempo is not defined
ON:
tempo is defined
Tempo 20–260 defined tempo
Playing Brushes [F3 (BRUSH)]
Parameter Value Description
Brush
Switch
OFF, ON
OFF:
for using sticks
ON:
for using brushes
Output Level Monitor [F5 (MONITOR)]
TD-20_Ref_e.book 29 ページ ２００５年５月２５日 水曜日 午前９時４９分