Filter
Top Products
52
Chapter 6. Sequencer (Playback)
fig.06-003_70
1.
Press [PATTERN].
[PATTERN] lights, and the “PATTERN” screen appears.
2.
Use [+/-] or [VALUE] to select the pattern.
* If you press [F5 (NEW)], an empty pattern with the lowest
number is called up.
fig.06-004_70
A:
Pattern Number
Currently selected pattern number.
B:
Pattern Name
The name of the currently selected pattern.
C:
Pattern Type
“P” is displayed for preset patterns, and “U” is
displayed for user patterns. When choosing an empty
pattern, an asterisk (*) appears.
D:
Pattern Playback Type (p. 58)
E:
Measure Number
Playback begins from the measure indicated here
when [PLAY] is pressed.
F:
Beat
G:
Part Mute Status (p. 54)
When you have finished making the settings, press
[PATTERN] to bring up this screen. This prevents data
from being overwritten inadvertently during
performance.
Here you can select patterns from a list of pattern names.
Pattern number, pattern name, beat, measure length, pattern
playback type, and tempo are displayed.
fig.06-List_70
1.
Press [PATTERN] - [F1 (LIST)].
The “PATTERN LIST” screen appears.
2.
Use [VALUE], [+/-], or [CURSOR (up/down)] to
select the pattern.
Function Buttons
[F1 (
▲
PAGE)]
The previous page of the list appears.
[F2 (PAGE
▼
)]
The next page of the list appears.
[F5 (NEW)]
An empty pattern with the lowest number is called up.
3.
Press [EXIT] to return to the “PATTERN”
screen.
fig.06-Play_70
1.
Select the pattern to play.
2.
Press [PLAY].
[PLAY] lights, and playback of the pattern begins.
3.
Press [STOP] to stop playback of the pattern.
[PLAY] goes off, and returns to the beginning of the
measure played at that moment.
4.
Press [STOP] once again to return to beginning
of the pattern.
Choosing a Pattern
[PATTERN]
About the “PATTERN” screen.
F
E
G
CABD
Select a Pattern from the List
[F1 (LIST)]
Playing Back a Pattern
[PLAY]
TD-20_Ref_e.book 52 ページ ２００５年５月２５日 水曜日 午前９時４９分