Filter
Top Products
91
Messages and Error Messages
Appendices
BULK DUMP
Receive Address Error!
The receive address of a system exclusive
message was incorrect.
Correct the receive address.
BULK DUMP
Receive Data Error!
A MIDI message was received incorrectly. If the same error message is displayed repeat-
edly, there is a problem with the MIDI messag-
es that are being transmitted to the TD-20.
BULK DUMP
Receive Time Out!
The interval in receiving system exclusive
messages were too long.
Make the interval of the data shorter.
Messages
Message Meaning Action
BULK DUMP
Receiving... Please Wait.
Bulk data is now being received. –
BULK DUMP
Aborted!
Bulk data transmission was halted. –
Preset Pattern! You cannot record on the preset pattern. Copy the pattern onto a user pattern.
Empty Pattern! This pattern contains no performance data; it
cannot be edited.
Select the other pattern that contains perfor-
mance data.
No Empty Pattern! There are no empty patterns for recording. Delete unneeded pattern (p. 66).
MIDI Offline! A MIDI cable was disconnected. (Or commu-
nication with the external MIDI device
stopped for some reason.)
Make sure that MIDI cables have not been
pulled out or broken.
MIDI Buffer Full! A large amount of MIDI messages were re-
ceived in a short time, and could not be pro-
cessed completely.
Confirm that the external MIDI device is prop-
erly connected. If the problem persists, reduce
the amount of MIDI messages sent to the TD-
20.
No Empty Backup! There are no empty backup area on the mem-
ory card.
Delete unneeded backup (p. 72).
No Empty
Backup Pattern!
There are no empty backup pattern on the
memory card.
Delete unneeded backup pattern (p. 68).
Power On Too Long.
Please Turn Off!
The power remains ON for a long time. Turn the TD-20’s power off, then turn on
again.
Auto Shutdown Completed.
Please Turn Off!
Message Meaning Action
TD-20_Ref_e.book 91 ページ ２００５年５月２５日 水曜日 午前９時４９分