Filter
Top Products
87
About Expansion Board
Appendices
4.
While positioning the holes on the board over
the board holders, carefully insert the
connector on the board into the socket on the
TD-20. Make sure the connector is securely
connected, and that all three board holders
project through the holes.
5.
Use the Installation Tool supplied with the
Expansion board to turn the holders in the
LOCK direction, so the board will be fastened in
place.
fig.00-049c
(To remove the Expansion board, turn the board holders
in the UNLOCK direction, and lift up the board using the
provided tool. Remove the board and secure the cover
plate.)
6.
Secure the cover plate using the eight screws
removed in step
2
.
LOCK
TD-20_Ref_e.book 87 ページ ２００５年５月２５日 水曜日 午前９時４９分