Filter
Top Products
26
Basic Operation
5. Adjusting the Stereo Position
Use the [PAN] dial to adjust the stereo position to the left or right.
fig.pan-dial.eps
Adjusting the Tone
Use the [HI] dial and [LO] dial in the [EQ] section to adjust the tone.
fig.EQ-dial.eps
1. Emphasize or attenuate the high band.
Turn the [HI] dial to emphasize or attenuate the high section.
2. Emphasize or attenuate the low band.
Turn the [LO] dial to emphasize or attenuate the low section.
Mixing Ambient Sounds into the Output
Using the internal microphones lets you mix the voices of nearby people or other ambient audio into the final output. The two
internal microphones on the VR-3 are installed at the locations shown below. To adjust the level for the internal microphones, go
to [INTERNAL MIC] and use the [LEVEL] dial.
fig.int-mic-location.eps
When the buttons and faders are operated, the internal microphones can pick up the sound of operation.