Filter
Top Products
46
Menu Operations and Menu List
AUDIO Menu
Here you make settings related to audio effects.
fig.audio-mix-menu.eps
1-4
5-8 INT MIC
REVERB
MASTERING
MASTERING FX SW
NOISE SUPPRESSOR
ENHANCER
This switches mastering effects on and off.
This adjusts the degree of application of the noise suppressor.
This adjusts the degree of application of the enhancer.
MASTER Lo
This suppresses distortion in the low band (220 Hz and lower).
MASTER Hi
This suppresses distortion in the high band (2 kHz and higher).
REVERB SEND
HIGH PASS / IN 1
This switches the high-pass filter for channel 1 on and off.
HIGH PASS / IN 2
This switches the high-pass filter for channel 2 on and off.
HIGH PASS / IN 3
This switches the high-pass filter for channel 3 on and off.
HIGH PASS / IN 4
This switches the high-pass filter for channel 4 on and off.
NOISE GATE / IN 1
This adjusts the degree of noise gate applied on channel 1.
NOISE GATE / IN 2
This adjusts the degree of noise gate applied on channel 2.
NOISE GATE / IN 3
This adjusts the degree of noise gate applied on channel 3.
NOISE GATE / IN 4
This adjusts the degree of noise gate applied on channel 4.
EQ Lo (dB) / IN 5/6
This adjusts the degree of lo (low-band) EQ applied on channels 5/6.
EQ Hi (dB) / IN 5/6
This adjusts the degree of hi (high-band) EQ applied on channels 5/6.
EQ Lo (dB)/ IN 7/8
This adjusts the degree of lo (low-band) EQ applied on channels 7/8.
EQ Hi (dB)/ IN 7/8
This adjusts the degree of hi (high-band) EQ applied on channels 7/8.
EQ Lo (dB)/ INT MIC
This adjusts the degree of lo (low-band) EQ applied for the internal mic.
EQ Hi (dB)/ INT MIC
This adjusts the degree of hi (high-band) EQ applied for the internal mic.
HIGH PASS / INT MIC
This switches the high-pass filter for the internal mic on and off.
NOISE GATE / INT MIC
This adjusts the degree of noise gate applied for the internal mic.
REVERB SW
This switches reverb on and off.
REVERB TYPE
This selects the reverb type.
REVERB TIME
This adjusts the sustain time for reverb.
REVERB DAMP
This adjusts the decay time for reverb.
REVERB LEVEL
This adjusts the degree of mixing for reverb sound.
REVERB SEND / IN1
This adjusts the amount of reverb send on channel 1.
REVERB SEND / IN2 This adjusts the amount of reverb send on channel 2.
REVERB SEND / IN3
This adjusts the amount of reverb send on channel 3.
REVERB SEND / IN4 This adjusts the amount of reverb send on channel 4.
REVERB SEND / IN5/6 This adjusts the amount of reverb send on channel 5/6.
REVERB SEND / IN7/8
This adjusts the amount of reverb send on channel 7/8.
REVERB SEND / INT MIC This adjusts the amount of reverb send for the internal mic.