Filter
Top Products
30
Compositing the Picture
3. Select the background.
Use the touch panel to choose the channel for the background. A red border appears around the selected channel.
fig.select-background.eps
4. Select the inset screen.
Use [VIDEO SELECT] buttons [1] through [4] to choose the channel for the inset screen. The indicator for the selected channel
lights up in green. Also, a green border appears around the selected channel on the touch panel.
fig.select-foreground.eps
5. Check the compositing results on the monitor.
At [MONITOR], press the [OUTPUT] button. You can now use the built-in monitor to check the results of compositing.
6. Make the inset screen disappear.
Go to [COMPOSITION] and press the [PinP] button again to make it go dark. When it goes dark, the inset screen disappears.
While compositing, no transition effect (MIX or WIPE) can be applied.
The duration of the fade when the inset screen appears or disappears is the time set for transition effects. By default, this is set at 0.5 seconds. You
can use the menus to change the time. Go to the [VIDEO] menu, and at [TRANSITION], adjust the setting value for [TRANSITION TIME]. Refer to
“Menu Operations” (p. 44) and “VIDEO Menu” (p. 45).
You can also make a setting that automatically selects the channel for the previously selected inset screen when the [PinP] button is pressed
again. Go to the [VIDEO] menu, and at [PinP], set [PREVIOUS SELECT] to [ON]. Refer to “VIDEO Menu” (p. 45).