Filter
Top Products
45
Menu Operations and Menu List
5. Change the setting value.
Selecting a parameter and turning the [VALUE] dial changes the setting value. Press the dial to apply the setting.
* You can change a setting value up or down by 10 units at a time by pressing down the dial as you turn it.
fig.value-dial.eps
6. Go back to the original screen.
Press the [MENU] button once to return to the screen called up in step 1. Press the [MENU] button once more to make the menu
display disappear.
VIDEO Menu
Here you make various settings related to video transitions and compositing.
fig.video-mix-menu.eps
Menu List
TRANSITION
WIPE
PinP
SPLIT
KEY
TRANSITION TIME
CH SCAN
SCAN TIME
DIRECTION
SOFT EDGE
PATTERN
H.POSITION
V.POSITION
4:3 HV.SIZE
H.SIZE
V.SIZE
BORDER
BORDER COLOR
SHADOW
SHADOW COLOR
TRIMMING
A-CENTER
CHROMA KEY COLOR
CHROMA KEY EDGE
LUMI KEY COLOR
LUMI KEY EDGE
This sets the length of time for transition effects.
This toggles automatic switching on and off.
This sets the length of time for automatic switching.
This selects the wipe direction.
This switches soft edges for wipe on and off.
This selects the wipe pattern.
This adjusts the horizontal position of the inset screen.
This adjusts the vertical position of the inset screen.
This adjusts the size of inset screen keeping aspect ratio at 4:3.
This adjusts the horizontal size of the inset screen.
This adjusts the vertical size of the inset screen.
This adjusts the width of the border added to the inset screen.
This selects the color of the border added to the inset screen.
This adjusts the width of the shadow added to the inset screen.
This selects the color of the shadow added to the inset screen.
This adjusts the trimming width of the inset screen.
This moves the side-A center position.
This selects the extraction color for chroma key.
This adjusts the degree of edge blur for chroma key.
This selects the extraction color for luminance key.
This adjusts the degree of edge blur for luminance key.
B-CENTER
This moves the side-B center position.
SOFT EDGE
This applies a soft edge to the split portion.
PATTERN
This selects the split pattern.
PREVIOUS SELECT
This applies the previously selected pattern and settings.
PREVIOUS SELECT
This applies the previously selected key and settings.
PREVIOUS SELECT This applies the previously set values for the inset screen.