Sanyo Digital Video Recorder Recording Equipment User Manual


 
SEARCHING FOR RECORDED IMAGES
Alarm search
All alarm recording images in the alarm recording area can be searched for and played back. If pre-alarm images have is recorded, the images
immediately before the alarms can also be played back.
Press the SEARCH FRAME/FIELD button during recording
or when the digital video recorder is stopped.
The SEARCH screen appears.
Use the jog dial to select ALARM SEARCH and then turn the
shuttle dial clockwise.
The ALARM SEARCH screen appears.
1
NO: Alarm number appears.
2
DATE/TIME: The date and time that the alarm was received and the images
were recorded appears.
3
TOTAL ALARM: The total number of alarm images recorded appears.
Use the jog dial to move the cursor in order to select the
images to be played back.
The selected alarm image appears in the preview screen.
Note:
Up to eight items of alarm information can be displayed on the ALARM
SEARCH screen. When the jog dial is turned, the previous or next alarm
information screen appears.
To end this search mode, press the SEARCH FRAME/FIELD button.
Turn the shuttle dial clockwise.
The preview image appears in a single-screen display and playback starts.
Note:
You can also use the shuttle dial or jog dial to carry out operations such as
pausing and fast-forward playback.
Alarm search starts playback from the image that was recorded at the instant
the alarm occurred, so if you are viewing pre-alarm images, use the shuttle
operations to carry out rewind playback.
Alarm search 2
Press an ALARM skip button during playback.
If you press the û button, playback skips to the previous alarm image.
If you press the ù button, playback skips to the next alarm image.
Note: When playing back using alarm search, the playback will pause at the
start and at the end of each alarm recording. Use the ALARM skip buttons
to play back previous and subsequent alarm recordings.
SEARCH
FRAME/FIELD
1
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
2
<ALARM SEARCH>
NO DATE TIME TOTAL ALARMS
008 12-20 05:37 0010
007 12-19 14:23
006 12-16 11:13
005 12-16 16:13
004 12-15 10:13
003 12-13 15:19
002 12-13 11:15
001 12-13 11:13
MOVE:JOG SELECT:SHUTTLE
12 3
3
<ALARM SEARCH>
NO DATE TIME TOTAL ALARM
008 12-20 05:37 0234
007 12-19 14:23
006 12-16 11:13
005 12-16 16:13
004 12-15 10:13
003 12-13 15:19
002 12-13 11:15
001 12-13 11:13
MOVE:JOG SELECT:SHUTTLE
4
11-18-01 ALARM 0004
25:03:12 EN 0.10SEC
ALARM
1
11-18-01 ALARM 0004
25:03:12 EN 0.10SEC
English
25