Filter
Top Products
SECURITY LOCK SET SETTING
C
Recording and playback operating privilege
setting
Selection of operating privilege
The available operations vary depending on the ON/OFF and
ADMIN/USER settings.
Selection
conditions
Details of operation
All operations are locked. When the user
password is entered at the password entry
screen, only playback operations can be
carried out. When the Administrator password
is entered, all operations can be carried out.
All operations are locked. When the user
password is entered at the password entry
screen, only playback and recording operations
can be carried out. When the Administrator
password is entered, all operations can be
carried out.
Recording and menu operations are locked.
Playback operations are not locked. When the
Administrator password is entered, all
operations can be carried out.
Menu operation is locked. Recording and
playback operations are not locked. When the
Administrator password is entered at the
password entry screen, all operations can be
carried out.
Security lock is not engaged (default setting).
Security lock is not engaged (default setting).
1
Use the jog dial to move the cursor to REC CONTROL.
2
Turn the shuttle dial clockwise, and then use the jog dial to
select “ ADMIN” or “ USER” .
This completes the setting.
3
Press the EXIT/OSD button.
The display returns to the normal screen.
D
Security lock setting
1
At the normal monitoring screen, press and hold the
SUHTTLE HOLD button for approximately 3 seconds.
The LOCK indicator at the front panel illuminates and the buzzer
sounds. The security lock is then set.
2
Press any operating button to check the security lock.
The password entry screen appears.
The screen display disappears after 5 seconds.
3
Use the jog dial and the shuttle dial to enter the password,
and then turn the shuttle dial clockwise once more.
The LOCK indicator goes off and the display returns to the
normal screen.
Note: Enter the password (example: “123456AB”) that was entered as
the Administrator or User password setting.
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : USER
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : ADMIN
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : USER
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : USER
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
LOCK
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
LOCK
EXIT/OSD
LOCK
SHUTTLE HOLD
POWER FULL
ALARM FULL
LOCKLOCK
REC/STOP
LOCK
SECURITY LOCKED !
PLEASE ENTRE YOUR PASSWORD
--------
CHANGE WITH JOG. SET WITH SHUTTLE
SECURITY LOCKED !
PLEASE ENTRE YOUR PASSWORD
********
CHANGE WITH JOG. SET WITH SHUTTLE
LOCK
1
2
3
English
65