Filter
Top Products
Initializing the D24 175
D24—Owner’s Manual
Initializing the D24
You can reset the D24 to its initial settings as follows.
1 Turn off the D24.
2 While holding down the [RTN TO ZERO] button, turn on the D24.
The D24 is initialized and “INITIALIZED” appears on the display.
Checking the Version Number
You can check the version number of the D24 system software as follows.
1 Turn off the D24.
2 While holding down the [UTILITY] button, turn on the D24.
The version number appears on the display.
Updating the System Software
See the Yamaha Professional Audio Web site at the address below for information on
system updates.
<http://www.yamaha.co.jp/product/proaudio/homeenglish/>