Filter
Top Products
Using the A & B Points 61
D24—Owner’s Manual
Using the A & B Points
The A and B points can be used for quick locate or A–B Repeat playback. See page 47
for more information on A–B repeat playback.
Setting the A & B Points
The A and B points can be set while the D24 is stopped or during rewind, fast forward,
playback, recording, or rehearsal.
1 While holding down the [SET] button, press the [A] button to set the A point,
or the [B] button to set the B point.
When a point is set, the corresponding indicator (A or B) lights up and the stored posi-
tion appears on the 2nd line of the display.
A and B points are set with sub-frame accuracy.
To set the A or B point to a specific position, first locate that position, see “Locating
Positions Directly” on page 63, and then store as explained above.
To set the A or B point to one of the 99 locate memories, first recall the locate memory,
see “Recalling Locate Points” on page 66, and then store as explained above.
The A and B points for each project are saved to disk automatically.
Locating the A & B Points
1 Press the [A] or [B] button to locate the A or B point respectively.
When the [A] or [B] button is pressed during playback, the stored point is located, and
then playback continues.
A
point
B
point
SETSET
A
B
A
point
B
point
Current
position
A
B