Filter
Top Products
Using Virtual Tracks 51
D24—Owner’s Manual
Using Virtual Tracks
Each main track has access to eight virtual tracks, making 64 tracks in all. Virtual tracks
are assigned to their respective main track using the Virtual Track function. Main and
virtual track combinations are identified using the notation 1-1, 1-2, 2-1, etc.,
(main-virtual). For example, “2-3” indicates that virtual track 3 is assigned to main
track 2, as shown in the following illustration.
1 While the D24 is stopped, press the [V. TRACK SELECT] button.
The V. TRACK SELECT indicator lights up and the display shown below appears.
The 1st line of the display shows the main track numbers from 1 through 8. The 2nd
line shows the virtual tracks assigned to those main tracks. Initially, each main track is
assigned its respective virtual track 1.
2 Use the SHUTTLE/CURSOR ring to select a main track.
The number of the virtual track assigned to the selected main track flashes on the 2nd
line of the display.
3 Use the JOG/DATA dial to assign a virtual track to the selected main track.
4 Press the [ENTER] button to apply your virtual track settings.
The V. TRACK SELECT indicator goes out and “FINISHED” appears on the display for
a few seconds.
In the following example, virtual track 5 is assigned to main track 3.
1
2
3
4
5
6
7
8
1-2
2-3
3-1
4-1
5-1
6-1
7-1
8-1
8 main tracks
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
64 virtual tracks
2-1
2-2
2-3
TRK 12345678
VI R 11111111
TRK 12345678
VI R 11511111
Selected main track
Assigned virtual track