120 PDS • User’s Guide
7. PDS-902 3G Enhancements
Input and Output Specifications
lìíéìí=péÉÅáÑáÅ~íáçåë
The output specifications for the PDS-902 3G are similar to those of earlier models, with
the following exceptions:
• The PDS-902 3G adds a BNC output connector on Program. This connector
outputs the following formats:
~ SD SDI per SMPTE 259M-C (NTSC/PAL resolution)
~ HD SDI per SMPTE 292M (HDTV)
~ 3G SDI per SMPTE 425M-2006, 3G, 2.97Gbps and (2.97/1.001) Gbps.
All “Mapping Structure 1” formats, Level A or Level B
• SMPTE 274M-2008
– 1920 x 1080p/60
– 1920 x 1080p/59.94
– 1920 x 1080p/50
~ BarcoLink
• BarcoLink @50 (1920x1200 @50)
• BarcoLink @59.94 (1920x1200 @59.94)
• BarcoLink @60 (1920x1200 @60)
The Barco proprietary BarcoLink technology enables WUXGA (1,920 x
1,200p @ 50/59.94/60 Hz) signals to be transmitted via a single coaxial
cable over a distance up to 100 meters. BarcoLink only works between
Barco image processing tools and projectors.
Interlaced output formats are available only on the Program BNC connector.
When an interlaced output format is selected, the Program DVI and HD-15 connectors
output the progressive version of the interlaced format in the RGB colorspace.
Format SD-SDI per SMPTE 259M-C (NTSC/PAL resolution)
HD-SDI per SMPTE 292M (HDTV)
3G-SDI per SMPTE 425
BarcoLink
Table 7-1. PDS-902 3G Input Specifications
Parameter Detail Specification
Table 7-2. PDS-902 3G Output Specifications
Parameter Detail Specification
Outputs DVI output 1 x DVI connector on Preview
1 x DVI connector on Program
RGB output 1 x HD-15 VGA connector on Preview
1 x HD-15 VGA connector on Program
3G/HD/SD SDI output 1 x BNC connector on Program
HDCP Encryption On DVI connectors only
