PDS • User’s Guide 59
4. Operation
Setup Menu
içÖç=jÉåì
A logo is a full-screen video source that, when you transition to it, appears on top of all
other sources. From the Setup Menu, select Logo to display the Logo Menu, which
enables you select, save and delete up to three full-screen logos.
Figure 4-35. Logo Menu (sample)
Following are descriptions of each Logo Menu function:
• Selection — This field enables you to select the desired Logo.
~ Selections: LOGO1, LOGO2 and LOGO3
~ Default: LOGO1
• Status [resolution] — This field shows the current resolution of the saved Logo,
if the output resolution matches the resolution at which the Logo was captured.
The field shows [EMPTY] if nothing has been saved at the selected location, or
[INVALID [resolution]] — e.g. [INVALID 1600x1200] — if the Logo resolution
does not match the current output resolution.
Because the field is not user selectable, all data is shown between brackets.
• Save Pgm to Logo — Choose this field and press SEL to save the current input
(on Program) to the selected Logo memory register. The Save Pgm to Logo field
does not appear if the Logo is pending or on Program.
• Delete Logo — Choose this field and press SEL to delete the Logo from the
selected memory register. The Delete Logo field does not appear if the Logo is
pending or on Program.
Refer to the “Using the Logo
” section on page 80 for more information on using Logos.
LOGO
Selection LOGO1
[1024x768]
Save Pgm to Logo
Delete LOGO1
