PDS • User’s Guide 37
4. Operation
Setup Menu
pÉíìé=jÉåì
After PDS initialization is complete, the Status Menu appears. This is the system’s top-
level menu. Refer to the “Status Menu
” section on page 35 for details.
To display the Setup Menu from the Status Menu, press SEL.
The figure below illustrates the Setup Menu:
Figure 4-8. Setup Menu (sample)
Following are descriptions of each Setup Menu function:
• Input Menu
• Output Menu
• Preview Menu (PDS 902 Only)
• Logo Menu
• User Preference Menu
• System Menu
• Tech Support Menu
• Factory Reset Menu
• Firmware Upgrade Menu
Note
When you make changes to input, output and system
parameters, your “configuration” information can be stored in
non-volatile memory — provided that you perform a “Save
Config” operation. In this way, your settings will be recalled
automatically each time the unit is turned on. Note that if the
“Auto Input Save” function is enabled in the User
Preferences Menu, the system automatically saves inputs.
SETUP
> Input >>
Output >>
Logo >>
User Preference >>
System >>
Tech Support >>
Factory Reset >>
Firmware Upgrade >>
