56 PDS • User’s Guide
4. Operation
Setup Menu
• Choose Preview to display on the preview monitor the “pending” source.
• Choose Program to display on the preview monitor the same source that is on
Program.
lìíéìí=cçêã~í
In the Preview Menu, the [output_format] field displays the format of the output, in the
following form:
Hact x Vact @ Vr Hz
1024x768@59.94
The output format for the PDS can be set to any of the progressive outputs.
To make pixel-for-pixel adjustments, set the Preview and Program resolutions to be the
same, as shown in the following illustration:
Figure 4-31. Matching Preview and Program Resolutions
If you do not need to make pixel-perfect adjustments to the Preview image, the resolutions
of the Preview and Program outputs do not need to be the same, as shown in the following
illustration:
Figure 4-32. Different Preview and Program Resolutions
qÉëí=m~ííÉêå
In the Preview Menu, the Test Patterns submenu provides the following options:
Note
The output format is not updated until you press SEL.
Program
Preview
*
* Preview output not available on
PDS-701 or PDS-901
PDS-xxx
Preview
1400 x 1050
Program
1400 x 1050
Program
Preview
*
* Preview output not available on
PDS-701 or PDS-901
PDS-xxx
Preview
1024 x 768
Program
1980 x 1080p
