Filter
Top Products
78
5. The parameter display will indicate “Load” and the
value display will indicate “All” Press key 13.
6. Select the file that you want to load. The value dis-
play will indicate “LdFile,” and the parameter dis-
play will show “(six characters of the filename).” Turn
the dial to select the desired file, and press key 13.
7. The parameter display will ask “Sure?” and the
value display will read “No.” Turn the dial to
change this to “Yes,” and press key 13 to execute
the Load operation. While the data is being loaded,
the step keys will indicate the state of progress.
When loading is completed, the EMX-1 will enter
Pattern mode with A01 selected.
If you decide to cancel, press the STOP/CANCEL key.
With the factory settings, memory protect is turned
on, so you will not be able to execute this opera-
tion. Turn memory protect off before you execute
the Load operation (☞p.76 “Saving your Global
mode settings”).
Loading a single pattern from
SmartMedia (Load Pattern)
1. Insert the SmartMedia card into the SmartMedia
slot.
2. Press the GLOBAL key. (It will light.)
3. Hold down the Shift key and press step key 13
(CARD) (key 13 will blink). The parameter display
will indicate “CardMenu.”
4.
The value display will indicate “Load.” Press key 13.
5. The parameter display will indicate “Load” and the
value display will indicate “All.” Turn the dial to
select “1Ptrn” and then press key 13.
6. Select the file (the filename you specified for Save
All) that contains the pattern you want to load. The
value display will indicate “LdFile” and the param-
eter display will show “(six characters of the
filename).” Turn the dial to select the desired file,
and then press key 13.
7. Select the pattern that you want to load. The pa-
rameter display will indicate “Load” and the value
display will show the “(pattern number)” (you can
hold down the shift key to display the pattern name
instead). Turn the dial to select the desired pattern,
and press key 13 to load it.
When loading is completed, you will return to Pat-
tern mode (key 13 will go dark, and the PATTERN
key will light).
If you decide to cancel, press the STOP/CANCEL
key.
Be aware that this procedure does not save (write)
the pattern into internal memory.
With the factory settings, memory protect is turned
on, so you will not be able to save data. Turn
memory protect off before you execute the Write
operation (☞p.76 “Saving your Global mode set-
tings”).
Deleting an EMX-1 file from
SmartMedia (Delete File)
Here’s how a user file containing EMX-1 pattern data, song
data, and global can be deleted from a SmartMedia card.
Once a file has been deleted, it cannot be read
again.
1. Insert the SmartMedia card into the SmartMedia
slot.
2. Press the GLOBAL key. (It will light.)
3. Hold down the Shift key and press step key 13
(CARD) (key 13 will blink). The parameter display
will indicate “CardMenu.”
4. The value display will indicate “Load.” Turn the
dial to select “Delete” and then press key 13.
5. Select the user file that you want to delete. The
value display will indicate “DelDMX” and the pa-
rameter display will show “(six characters of the
filename).” Turn the dial to select the file, and then
press key 13.
6. The parameter display will ask “Sure?” and the
value display will read “No.” Turn the dial to
change this to “Yes” and press key 13 to execute
the Delete operation. While the file is being deleted,
the step keys will indicate the state of progress.
Only EMX-1 user files can be deleted by the EMX-1.