Roland AT20s Musical Instrument User Manual


 
103
Display Messages
E.00
fig.E.00
Meanings:
To protect the copyright, this music file cannot be saved as
SMF format.
When you want to save as Atelier format, you can save
only original disk.
E.01
fig.E.01
Meanings:
You can only play the music data. It cannot be saved on a
floppy disk or internal memory.
E.02
fig.E.02
Meanings:
The protect tab on the floppy disk is set to the Protect
position.
Change it to the Write position and repeat the procedure.
E.03
fig.E.03
Meanings:
This floppy disk cannot store the format or save any data.
Insert a different disk and repeat the procedure.
E.05
fig.E.05
Meanings:
•A new song cannot be saved onto this floppy disk.
E.10
fig.E.10
Meanings:
No floppy disk is connected to the disk drive. Insert the
disk correctly, and repeat the procedure.
E.11
fig.E.11
Meanings:
There is not sufficient space left on the floppy disk for the
data to be saved. Save the data onto a different floppy disk
or delete music data on the disk.
E.12
fig.E.12
Meanings:
The floppy disk inserted into the disk drive cannot be
read.
Please format the floppy disk.
E.13
fig.E.13
Meanings:
The floppy disk was removed from the disk drive while
loading or writing was in progress. Insert the floppy disk
and repeat the procedure.
E.14
fig.E.14
Meanings:
This floppy disk is damaged and cannot be used. Insert a
different disk and repeat the procedure.
E.15
fig.E.15
Meanings:
This song cannot be read.
E.16
fig.E.16
Meanings:
It cannot be read the floppy disk quickly enough. Press
the [Reset] button, then press the [Play] button to play the
song.
AT-20S.e.book 103 ページ 2003年11月10日 月曜日 午後2時37分