Filter
Top Products
91
Various Other Settings
Using the Foot Switch to to
Switch Registrations (Regist
Shift)
You can use the Foot Switch as a dedicated switch for
selecting registrations in order.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to
select “Regist Shift.”
3.
Press the Value [-] and [+] buttons to switch the
Regist Shift “ON” or “OFF.”
ON
Dedicated switch for selecting registrations
OFF
Functions other than selecting registrations can
also be used
If Registration Shift is turned ON, each time you press the
left Foot Switch, the registrations will be selected in the
following order: 1
➔
2
➔
3
➔
...
➔
12
➔
1
➔
.. etc.
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
➔
This setting remains stored in memory even while the power is
turned off.
Changing the Sound of the
Count Down (Count Down
Sound)
You can change the sound that is used for the count played at
the end of the intro (p. 34).
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to
select “Count Down Sound.”
3.
Press the Value [-] and [+] buttons to select the
type of sound for Intro Count Down.
VOICE
Human voice count (One, two, three...)
STICK
Stick sound count
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
Changing the Pedalboard
Polyphony (Pedal Bass
Mode)
You can set the Bass Pedalboard to play simultaneous
multiple notes or single notes only.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to
select “PedalBass Mode.”
fig.12-06
3.
Press the Value [-] and [+] buttons to switch the
Pedal Bass Mode “MONOPHONIC” or “POLY-
PHONIC.”
MONOPHONIC
Only single notes can be played.
POLYPHONIC
Multiple notes can be played.
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
AT-20S.e.book 91 ページ ２００３年１１月１０日 月曜日 午後２時３７分