Filter
Top Products
37
Using the Rhythm Performance
Using a Rhythm from a Disk
The AT-20S contains 90 types of built-in Rhythms (Music Styles). Additional Rhythms
(Music Styles) are available on the Music Style disk included are available. Here’s how
to select a Rhythm (Music Style) from a Music Style disk.
■
Inserting and Ejecting a Floppy Disk
If you’re using the disk drive for the first time, be sure to read the important notes on page 6.
1.
Hold the floppy disk with the label facing upwards, and push it into
the disk drive until it clicks into place.
The disk drive is on the right side of the unit, above the keyboard.
fig.03-13
Never eject a disk while reading or writing is in progress, since that can damage the magnetic
surface of the disk, rendering it unusable. (The disk drive’s indicator will light up at full
brightness when the drive is busy reading or writing data. Ordinarily, the indicator will be less
brightly lit, or be extinguished.).
2.
Press the Eject button.
The floppy disk is ejected a little out of the slot. Gently grasp the end of the floppy disk
and pull it out.
■
Reviewing the Styles on a Music Style Disk
1.
Press the Rhythm [Disk] button (confirm that its indicator is lit)
2.
Insert the Music Style disk into the disk drive.
3.
Use the Select [-] [+] buttons to select a Rhythm on the Music Style
disk.
The [Start/Stop] button indicator will be blinking while the Rhythm is being loaded.
You can play the selected Rhythm after loading is completed.
4.
Press the [Start/Stop] button or the [Intro/Ending] button.
The selected Rhythm is played.
NOTE
Eject buttonIndicator
Floppy Disk
NOTE
NOTE
AT-20S.e.book 37 ページ ２００３年１１月１０日 月曜日 午後２時３７分