Filter
Top Products
88
Adjusting the Effects
Changing the Reverb Type
You can select from the following 11 types of Reverb:
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to
select “Reverb Type.”
fig.11-04
3.
Press the Value [-] and [+] buttons to select a
Reverb type.
ROOM 1
Reverberation of a small room
ROOM 2
Reverberation of a small club
ROOM 3
Reverberation of a large room
HALL 1
Reverberation of a large concert hall
HALL 2
Reverberation of a small concert
hall
SMALL CHURCH
The reverberation of a small church
LARGE CHURCH
The reverberation of a large church
CATHEDRAL
The reverberation of a cathedral
PLATE
A bright, metallic Reverberation
DELAY
An echo-like sound repeated sever-
al times
PAN DELAY
Similarly to the above but where the
sound is panned between the left
and right speakers
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
* It is not possible to modify the delay time (delay interval) when
“PAN DELAY” is selected.
Changing the Depth of the
Reverb
The depth of the Reverb can be set (0–10) for the following
Parts. You can make independent settings for each Part.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to
select “Reverb Depth.”
fig.11-05
3.
Press the Part [ ] and [ ] buttons to select
the part whose reverb depth you wish to adjust.
Part
Accomp (Automatic Accompaniment except
Bass), Rhythm, Drums/SFX, A.Bass (Bass part
of Automatic Accompaniment), Pedal, L.Or-
gan, L.Orch, U.Organ,U.Orch, Solo
4.
Press the Value [-] and [+] buttons to adjust the
setting.
Settings
0 – 10
AUTO
(Accomp, Rhythm, A.Bass)
For the three Parts of the Accomp, Rhythm and Accompa-
niment Bass, you have the option of selecting the “AU-
TO” setting. Parts for which “AUTO” is selected will be
set to the Reverb Depth that is most suitable for the
Rhythm currently selected.
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
AT-20S.e.book 88 ページ ２００３年１１月１０日 月曜日 午後２時３７分