Filter
Top Products
82
Settings for the Composer
Muting Individual Channels
of Performance Data
You can mute (silence) individual channels of performance
data of SMF music files (sold separately).
* It is not possible to mute the performance that you play on the
AT-20S (except for the Rhythm and Automatic Accompa-
niment).
1.
Press the [Function] button.
2.
Press the Select [-] [+] buttons to select
“Ch.Mute.”
3.
Press the [Bwd] / [Fwd] buttons to select the
channel that you wish to mute.
From the left, these are “1 Ch. (channel 1), 2 Ch. ... 15 Ch.,
and 16 Ch.”
fig.09-09
4.
Press the [Rec] button.
fig.09-10
The number will change to “–,” indicating that the corre-
sponding channel has been muted.
5.
Once again press the [Rec] button, and muting
will be canceled.
To return to the basic screen, press the [Function] button
or the [Display/Exit] button.
* Channel mute will be defeated when you perform the following
operations.
- Press the Select [-] and [+] buttons to select different perfor-
mance data.
- Press the [Demo] button to play performance data.
Switching the Display of
Lyrics On or Off
Some music files have Lyrics included and these Lyrics can
be displayed on the screen. You can turn on or off the lyrics
display of such music files.
1.
Press the [Function] button.
2.
Press the Select [-] and [+] buttons to select
“Lyric.”
fig.09-11
3.
Press the [Bwd] / [Fwd] buttons to switch the
lyric display “ON (displayed)” or “OFF (not dis-
played).”
To return to the basic screen, press the [Function] button
or the [Display/Exit] button.
* If you press a voice select button while playing back music files
that contains lyrics, the display screen will switch, and the
lyrics will no longer be displayed. To re-display the lyrics, press
the [Play] button once again.
➔
This setting remains stored in memory even while power is
turned off.
AT-20S.e.book 82 ページ ２００３年１１月１０日 月曜日 午後２時３７分