Filter
Top Products
72
Record and Playback Your Performance
Loading Performance Songs Into the AT-20S
To edit (p. 83) or re-record a performance song that is stored on a floppy disk, you must
first load that song into the instrument.
fig.08-25
1.
Insert the floppy disk containing performance songs into the disk
drive.
2.
Press the Select [-] or [+] button to select the performance song you
wish to load.
3.
Press the [Load] button.
The selected performance data will be loaded into internal memory.
●
If the following screen will appear
The following message below is shown when the performance song in the unit has not
been saved to floppy disk.
fig.08-10
❍
If you wish to erase the performance song
1.
Press the [Rec] button.
❍
If you wish to save the performance song on a floppy disk
1.
Press the [Reset] button to cancel the procedure.
2.
Save the song onto a floppy disk (p. 70).
2
Composer
Demo
Load SaveFunction Registration
Stop
Reset
Play Rec FwdBwd
Select
Clear
Rename
Lower Upper Solo ControlAccomp BassRhythm
Tr ack
3
AT-20S.e.book 72 ページ ２００３年１１月１０日 月曜日 午後２時３７分