Filter
Top Products
29
Selecting and Playing Sounds
■
Changing the Drum/SFX Set
Immediately after the power is turned on, the STANDARD drum set will sound.
Let’s try selecting a different Drum Set or the Sound Effect set.
As the drum set, you can choose from 8 types of drum set and one type of sound effect.
When you change the drum set, the sound produced by each note will change.
Refer to “Drum Set List” (p. 106) for details on which drum sound or Sound Effect will be
played by each note.
fig.02-19
1.
Press the [Drums/SFX] button (indicator lights).
2.
When the Drum Set name is displayed on the screen, press the
Value [-] [+] buttons to select a Drum Set or Sound Effect Set.
The [Drums/SFX] button indicator will begin to blink.
fig.02-20
You can select from 8 different Drum Sets and one set of Sound Effects as follows:
STANDARD, ROOM, POWER, ELECTRONIC, TR-808, JAZZ, BRUSH, ORCHESTRA,
SOUND EFFECTS
3.
Press the [Drums/SFX] button once again.
The [Drums/SFX] button indicator will be lit constantly, and the selected Drum/SFX set
will be applied.
To stop mid-way through this or any procedure, press the [Display/Exit] button.
The Drum Set Type can also be selected from the Utility menu. Please refer to “Drums/SFX
Set” (p. 93).
1, 3
2
Drums/SFX
Lower
Display/Exit
Part
Menu
Value
Utility
AT-20S.e.book 29 ページ ２００３年１１月１０日 月曜日 午後２時３７分