Filter
Top Products
63
Record and Playback Your Performance
Playing Back a Performance Song
fig.08-06
1.
Press the [Reset] button to return to the beginning of the first mea-
sure (bar).
The location at which playback will start will return to the beginning of measure 1.
When you wish to play a performance song from a specific point, press the [Bwd] /
[Fwd] buttons to select the desired measure (bar).
2.
Press the [Play] button to start playback.
After playback reaches the end of the performance, it will stop automatically.
3.
To stop playback at any point, press the [Stop] button.
If you press the [Play] button while holding down the [Stop] button, the metronome will play
two measures (bars) of count-in before playback starts.
The [Play] and [Stop] functions can be assigned to the foot switch. Each touch of the switch will
alternate the operation between the Play and Stop functions (p. 90).
You can specify whether or not the Expression Pedal will affect the playback and what you play
while Atelier music data is being played back (p. 81).
If you use the Rhythm or Automatic Accompaniment immediately after having loaded and
played back a song other than an Atelier performance song, such as SMF’s, etc., the playback
may not sound right (the voices may have changed, etc.) To prevent this from happening, press
the [Reset] button before playback.
■
Add a Count Sound to Match the Timing (Count In)
In cases such as when you want to perform in time with a song, you can have a count
sound played before playback of the song begins, allowing you to synchronize your own
performance with the song.
Playing back a song after playing the count sound is called “Count In.”
1.
Hold down the [Stop] button and press the [Play] button.
1
2
3
Composer
Demo
Load SaveFunction Registration
Stop
Reset
Play Rec FwdBwd
Select
Clear
Rename
Lower Upper Solo ControlAccomp BassRhythm
Tr ack
NOTE
AT-20S.e.book 63 ページ ２００３年１１月１０日 月曜日 午後２時３７分