Filter
Top Products
109
Effects List
Appendices
TREMOLO CHORUS
This is a chorus effect with added Tremolo (cyclic modulation of
volume).
fig.TremCho
SPACE-D
This is a multiple chorus that applies two-phase modulation in
stereo. It creates no audible modulation, yet produces a transparent
chorus effect.
fig.SpaceD
STEREO FLANGER
This is a stereo flanger. (The LFO has the same phase for left and
right.) It produces a metallic resonance that rises and falls somewhat
like a jet airplane taking off or landing.
fig.Flanger
STEP FLANGER
This is a flanger in which the flanger pitch changes in steps.
fig.StepFlanger
STEP FLANGER SYNC (Sync type)
Step Flanger synchronized to the BPM. Rate, set with INTENSITY,
changes according to the note length corresponding to the BPM
setting.
How to Set the BPM Sync Start Timing (p. 112)
RING MODULATOR
This is an effect that applies amplitude modulation (AM) to the input
signal, producing bell-like sounds.
fig.RingMod
Parameter Value Description
INTENSITY
(Tremolo Rate)
0.05–10.0 Hz Modulation frequency of the tremolo
effect
COLOR
(Phase)
0–180 deg Spread of the tremolo effect
RATE (DEPTH)
(Chorus Rate)
0.05–10.0 Hz Modulation frequency of the chorus
effect
LEVEL
(Chorus Depth)
0–127 Modulation depth of the chorus effect
Parameter Value Description
INTENSITY
(Chorus Rate)
0.05–10.0 Hz Frequency of modulation
COLOR
(Chorus Phase)
0–180 deg Spatial spread of the sound
RATE (DEPTH)
(Chorus Depth)
0–127 Depth of modulation
LEVEL
(Balance)
0–100 Relative amount of chorus sound
Parameter Value Description
INTENSITY
(Rate)
0.05–10.0 Hz Frequency of modulation
COLOR
(Phase)
0–180 deg Spatial spread of the sound
RATE (DEPTH)
(Depth)
0–127 Depth of modulation
LEVEL (Feed-
back)
-98– +98% Adjusts the amount of the flanger
sound that’s fed back into the effect.
Negative (-) settings invert the phase.
Tremolo Chorus
L in
R in
L out
R out
L in
R in
Space D
Space D
L out
R out
R in
R out
L in
L out
Flanger
Feedback
Feedback
Flanger
Parameter Value Description
INTENSITY
(Step Rate)
0.05–10.0 Hz Rate (period) of pitch change
COLOR
(Depth)
0–127 Depth of modulation
RATE (DEPTH)
(Rate)
0.05–10.0 Hz Frequency of modulation
LEVEL
(Feedback)
-98– +98% Adjusts the amount of the flanger
sound that’s fed back into the effect.
Negative (-) settings invert the phase.
Parameter Value Description
INTENSITY
(Step Rate)
note *1 (p. 112) Rate (period) of pitch
change
COLOR
(Depth)
* Same as “STEP FLANGER”
RATE (DEPTH)
(Rate)
LEVEL
(Feedback)
Parameter Value Description
INTENSITY
(Frequency)
0–127 Adjusts the frequency at which mod-
ulation is applied.
COLOR
(Polarity)
[UP], [dWn] Direction in which the change in fre-
quency moves
[UP]: Towards higher frequencies
[dWn]: Towards lower frequencies
RATE (DEPTH)
(Sens)
0–127 Adjusts the amount of frequency
modulation applied.
LEVEL
(Balance)
0–100 Relative amount of effect sound
R in
R out
L in
L out
Feedback
Feedback
Step Flanger
Step Flanger
L in
R in
L out
R out
Ring Mod
Ring Mod