Filter
Top Products
98
Error Message List
If there has been a mistake in operation, or if the SH-32 is unable to continue processing as you directed,
an error message will appear in the display. Take the appropriate action for the displayed error message.
* This section gives the error messages in alphabetical order.
Display Situation Action
The internal backup battery (the battery which maintains
the data in the user memory) is running down.
Contact your dealer or a nearby Roland service center to have the
battery replaced.
It is possible that a MIDI cable has been pulled out or has
a short.
Check the MIDI cable.
The checksum value of a system exclusive message was
incorrect.
Correct the checksum value.
Due to an inordinate volume of MIDI messages received,
the SH-32 has failed to process them properly.
Reduce the amount of MIDI messages to be transmitted.
It is possible that the power has been turned off for the
MIDI device connected to the SH-32’s MIDI IN connector.
Check the power of the connected MIDI device.
A MIDI message was received incorrectly. If the same error message is displayed repeatedly, there is a problem
with the MIDI messages that are being transmitted to the SH-32.