Filter
Top Products
88
Chapter 8. Using the SH-32 with External MIDI Devices
When Switching Patches
The MIDI messages transmitted by the external MIDI device will be
received by the SH-32 to select Patches as shown in the following
table.
When Switching Rhythm Sets
The MIDI messages transmitted by the external MIDI device will be
received by the SH-32 to select Rhythm Sets as shown in the
following table.
When Switching Performances
The MIDI messages transmitted by the external MIDI device will be
received by the SH-32 to select Performances as shown in the
following table.
Synchronizing Arpeggiator
and the LFO to an External
MIDI Device
You can synchronize the Arpeggiator performance tempo and the
LFO modulation cycle to an external MIDI device’s tempo (clock).
1. Use a MIDI cable to connect the SH-32’s MIDI IN connector to
the MIDI OUT connector on the external MIDI device.
2. Set the System function’s CLOCK to “ ” (MIDI) (p. 92).
3. When synchronizing the LFO modulation rate, press [BPM
SYNC], causing the indicator to light.
4. Transmit the MIDI clock from the external MIDI device. For
instructions on how to do this, refer to the owner’s manual
for the external MIDI device.
This synchronizes the Arpeggiator performance tempo or LFO
modulation cycle to the external MIDI device’s tempo.
Saving SH-32 Settings on an
External Sequencer
(BULK DUMP)
With the SH-32, you can transmit various settings to an external
device in the form of exclusive messages. This is referred to as Bulk
Dump. Thus, you can save the SH-32’s settings by connecting an
external sequencer or other device and transmitting the data to the
sequencer. Alternatively, instead of an external sequencer, by
connecting another SH-32 and transmitting the data to it, you can set
two SH-32s simultaneously.
1. Use a MIDI cable to connect the SH-32’s MIDI OUT connector
to the MIDI IN connector of the external sequencer.
2. Turn the FX/SYSTEM knob to “SYSTEM.”
fig.05-01.e
Bank Number Bank Select Program
Change Number
MSB LSB
A (User) 11–18 87 0 1–8
21–28 87 0 9–16
31–38 87 0 17–24
41–48 87 0 25–32
51–58 87 0 33–40
61–68 87 0 41–48
71–78 87 0 49–56
81–88 87 0 57–64
B (User) 11–18 87 0 65–72
21–28 87 0 73–80
31–38 87 0 81–88
41–48 87 0 89–96
51–58 87 0 97–104
61–68 87 0 105–112
71–78 87 0 113–120
81–88 87 0 121–128
C (Preset) 11–18 87 64 1–8
21–28 87 64 9–16
31–38 87 64 17–24
41–48 87 64 25–32
51–58 87 64 33–40
61–68 87 64 41–48
71–78 87 64 49–56
81–88 87 64 57–64
D (Preset) 11–18 87 64 65–72
21–28 87 64 73–80
31–38 87 64 81–88
41–48 87 64 89–96
51–58 87 64 97–104
61–68 87 64 105–112
71–78 87 64 113–120
81–88 87 64 121–128
Bank Number Bank Select Program
Change Number
MSB LSB
(User) r1U 86 0 1
r2U 86 0 2
(Preset) r3P 86 64 1
r4P 86 64 2
Bank Number Bank Select Program
Change Number
MSB LSB
(User) 1-1–1-8 85 0 1–8
2-1–2-8 85 0 9–16
3-1–3-8 85 0 17–24
4-1–4-8 85 0 25–32
5-1–5-8 85 0 33–40
6-1–6-8 85 0 41–48
7-1–7-8 85 0 49–56
8-1–8-8 85 0 57–64
blinking